Usage: Suitable for BOPP / PVC / PE / Mei Wen paper / imported high-grade double-sided tape / kraft paper tape / conductive foam adhesive / cloth base / industrial tape, etc.
Cut and cut.
1. main drive part: using Taiwan AC motor and frequency converter as the material for cutting coil material, acceleration and deceleration is stable and fast.
2. central control unit: the use of programmable central control, coaxial can set a variety of dimensions (up to 20 modes) disposable automatic conversion cutting, so that unmanned operation automatically.
3. Operating panel part: Operating interface is 10.4 inches of Taiwan Weilun LCD touch screen. It can set various cutting conditions and running conditions on the screen directly.
4. Motor control system: the central control system is PLC programmable controller, coaxial can set a variety of sizes, the computer automatically adjust the cutting width.
5. cutting and positioning system: the use of Japanese, European series brand servo motor control, high precision imported ball screw for size positioning and use of linear sliding rail bearing knife seat, positioning precision and smooth.
6. knife positioning system: using Japanese, European series brand servo motor control method, can be humanized to do three segments speed feed cutting roll, improve efficiency and get the best quality.
Automatic angle adjustment of 7. round knife: using the servo motor of Japanese and European series brands to calculate the angle steering of the circular knife, the cutting angle can be changed directly when the cutting plane is not good, when the different materials do different angles (angle adjustment range is 8 degrees). It can reduce the number of cutting tools, avoid the trouble of manual angle adjustment, and greatly improve production. Efficiency.
8. quick shaft change device: This machine has two cutting axes to choose from, and adopts quick shaft changing mode to meet different material needs.
9. (optional) installed a large safety shield, greatly improving the safety performance of the machine operation.
Main technical parameters:
Machine width 1.0M 1.3M 1.6M
Cutting precision of + 0.1mm
Maximum winding diameter 150-220mm
Minimum winding width 1mm
Diameter of a circular knife with a diameter of 180-250mm